Sea Wolf solved: a full game, site by site
A whole game from the Sea Wolf simulator solved step by step: what to filter in the profile, what to save for the next site, what to pick in each pool round and how to reach the treatment, with the sums in plain view.
Practice Sea Wolf for freeThis guide solves a full game from the Sea Wolf simulator, all 3 sites from start to finish. Each site teaches something different: in the first, the microbe that completes the treatment doesn’t fit on its own; in the second, one you saved earlier saves you; and in the third, 100% is impossible.
Play this exact game: open game 100016, pick a mode and play it before you keep reading. Then compare your decisions with the ones below.
For the general rules, start with the Sea Wolf guide. This is a game from our simulator, not from the real assessment: McKinsey doesn’t publish its rules and the real interface may look different.
The trick used throughout this guide: switch to sums
The site asks for the average of the 3 microbes to fall within a range. Instead of dividing, multiply the range by 3 and work with the sum. If density has to average between 5 and 7, the sum of the 3 densities has to be between 15 and 21.
That gives you the key tool, which this guide calls the third microbe’s window: if you already have 2 good microbes, subtract their sums from the range and what’s left is the values the third one needs. That way, in every pool round you know exactly what to look for.
Site 1
Requirements: density from 5 to 7, energy from 4 to 7 and size from 3 to 5. Desired trait: hydrophilic. Undesired: aerobic.
As sums: density from 15 to 21, energy from 12 to 21 and size from 9 to 15.
Profile
You pick 2 features to filter by. The best choice is the undesired trait and the most restrictive attribute. Density and size have the narrowest ranges (2 points wide), but size sits closer to one end of the scale, so it filters out more microbes.
Filters: aerobic (undesired) and size from 3 to 5.
Categorize
10 microbes come up one at a time, and you decide whether they go to the current site, the next one or the discard pile. Here the clue for site 2 says its desired trait is heat-resistant. In the tables, D·E·S stands for each microbe’s density, energy and size.
| Microbe | D · E · S | Trait | Goes to |
|---|---|---|---|
| Pelo Vibrio | 8 · 6 · 8 | Light-sensitive | Site 1 |
| Glauco Bacillus | 7 · 7 · 2 | Heat-resistant | Site 1 |
| Yaro Virus | 8 · 5 · 5 | Heat-resistant | Site 1 |
| Vexa Mycelium | 4 · 3 · 2 | Aerobic | Out |
| Kyra Fungor | 7 · 7 · 8 | Heat-resistant | Site 1 |
| Zenti Alga | 8 · 7 · 5 | Aerobic | Out |
| Orun Bacillus | 4 · 10 · 10 | Hydrophilic | Out |
| Lano Fungor | 6 · 6 · 3 | Hydrophilic | Site 1 |
| Coral Agaric | 6 · 1 · 9 | Heat-resistant | Site 2 |
| Rhesa Virus | 9 · 3 · 5 | Aerobic | Out |
The simulator’s rule: a microbe works for a site if it doesn’t carry the undesired trait and at least 2 of its 3 values fall within the range or one point away. The aerobic ones go straight out, and Orun Bacillus has very high energy and size.
The decision that matters is Coral Agaric. It’s no use for site 1 (energy 1 and size 9), but it has the trait site 2 wants. Sending it there looks like a detail, and in site 2 it turns out to be key.
In the simulator, whatever you send to the next site goes into its starting pool. What you mark for the current site isn’t added to your pool: the pool is built in the next step.
Pool
You start with these 6:
| Microbe | D · E · S | Trait |
|---|---|---|
| Numa Plankton | 8 · 7 · 5 | Hydrophilic |
| Ixa Mycelium | 7 · 4 · 3 | Hydrophilic |
| Tessa Bacillus | 10 · 3 · 3 | Light-sensitive |
| Ixa Spore | 10 · 9 · 9 | Heat-resistant |
| Vexa Phage | 7 · 1 · 2 | Aerobic |
| Delo Agaric | 7 · 9 · 5 | Heat-resistant |
These 6 can’t make a perfect treatment yet: the best is 80%. You need to find the missing piece in the rounds.
Build the base. Numa Plankton and Ixa Mycelium are hydrophilic (they cover the desired trait) and close to the ranges. Together they add up to 15 density, 11 energy and 8 size.
Work out the third microbe’s window:
- Density: the sum has to be 15 to 21, and you have 15. The third needs 6 or less.
- Energy: 12 to 21, and you have 11. The third needs between 1 and 10, so anything works.
- Size: 9 to 15, and you have 8. The third needs 7 or less.
- And it can’t be aerobic.
Round 1:
| Option | D · E · S | Fits? |
|---|---|---|
| Fenra Virus | 5 · 5 · 3 | No: it’s aerobic |
| Pelo Plankton | 3 · 8 · 3 | Yes |
| Ixa Agaric | 7 · 1 · 7 | No: density |
Pick Pelo Plankton (heat-resistant, which is fine here). On its own it looks bad: density 3 and energy 8, both out of range. But with the base, the sums come out at 18, 19 and 11, all inside. That’s the lesson of this site: you’re not looking for the perfect microbe, you’re looking for the one that balances the set.
Fenra Virus is the trap. All three of its values are in range, but it carries the forbidden trait, and that drops the treatment to 80%.
Rounds 2 to 4: you already have a 100% treatment, so each round is for adding a backup. Using the same window, Talu Alga (5 · 6 · 5), Cetu Virus (6 · 5 · 3) and Lumi Spore (6 · 7 · 5) also complete 100% with the base. Picking them leaves you alternatives in case you got a calculation wrong.
Treatment
Numa Plankton + Ixa Mycelium + Pelo Plankton.
| Density | Energy | Size | |
|---|---|---|---|
| Sum | 18 | 19 | 11 |
| Sum range | 15 to 21 | 12 to 21 | 9 to 15 |
| Average | 6.00 | 6.33 | 3.67 |
It has the desired trait (two hydrophilic microbes) and nothing aerobic: 100%.
Site 2
Requirements: density from 7 to 9, energy from 3 to 6 and size from 6 to 8. Desired: heat-resistant. Undesired: light-sensitive.
As sums: density from 21 to 27, energy from 9 to 18 and size from 18 to 24.
Profile: light-sensitive (undesired) and density from 7 to 9. Density and size have the narrowest ranges, and density sits closer to the end of the scale.
Categorize: the clue for site 3 says its size runs from 2 to 4. The microbe to save is Brava Spore (9 · 9 · 3, heat-resistant): it’s no use here, but its size of 3 fits site 3. The light-sensitive ones get discarded.
Pool
Because you sent Coral Agaric over from site 1, it shows up in your starting pool:
| Microbe | D · E · S | Trait |
|---|---|---|
| Delo Mycelium | 9 · 6 · 5 | Aerobic |
| Coral Agaric (from site 1) | 6 · 1 · 9 | Heat-resistant |
| Brava Mycelium | 8 · 10 · 6 | Aerobic |
| Pholo Plankton | 9 · 7 · 6 | Heat-resistant |
| Quara Plankton | 7 · 10 · 2 | Aerobic |
| Ixa Phage | 7 · 6 · 8 | Heat-resistant |
This time the treatment is already in the starting pool: Delo Mycelium + Coral Agaric + Brava Mycelium.
| Density | Energy | Size | |
|---|---|---|---|
| Sum | 23 | 17 | 20 |
| Sum range | 21 to 27 | 9 to 18 | 18 to 24 |
Look at how they offset each other: Coral Agaric has energy 1 and Brava Mycelium has 10. Neither fits alone, but together they put energy at 17. Coral also brings the desired trait. Aerobic isn’t forbidden here, so Delo and Brava are fine.
If you didn’t save Coral Agaric, the starting pool only reaches 80% and you have to find the missing piece in the rounds. The base would be Delo Mycelium + Ixa Phage (16 · 12 · 13), and the third microbe’s window asks for density from 5 to 11, energy of 6 or less, size from 5 to 11 and nothing light-sensitive. In round 1 you get Ambri Spore (10 · 4 · 5, heat-resistant), which completes 100%.
With 100% secured, avoid the light-sensitive ones in the rounds and add backups. Ambri Spore is a good pick in round 1 even if you already have the treatment.
Site 3
Requirements: density from 7 to 10, energy from 5 to 8 and size from 2 to 4. Desired: aerobic. Undesired: light-sensitive.
As sums: density from 21 to 30, energy from 15 to 24 and size from 6 to 12.
Profile: light-sensitive and size from 2 to 4, the narrowest range. This is the last site, so when categorizing you only decide between keeping or discarding.
Pool
| Microbe | D · E · S | Trait |
|---|---|---|
| Brava Spore (from site 2) | 9 · 9 · 3 | Heat-resistant |
| Talu Spore | 9 · 6 · 4 | Light-sensitive |
| Orun Phage | 8 · 7 · 8 | Light-sensitive |
| Fenra Fungor | 9 · 9 · 1 | Hydrophilic |
| Cetu Spore | 2 · 8 · 1 | Aerobic |
| Glauco Phage | 8 · 6 · 8 | Hydrophilic |
First, check whether 100% is possible. The only aerobic microbe within reach is Cetu Spore, with density 2, and no other shows up in the rounds. If you use it, the other two would need at least 19 density between them to reach 21. The most you can get is 9 + 9 = 18. There’s no 100% on this site.
Spotting this quickly is worth a lot: the mistake would be spending ten minutes looking for a combination that doesn’t exist.
Lock in 80%. Without the desired trait you lose 20%, but you can meet everything else: Brava Spore + Fenra Fungor + Glauco Phage.
| Density | Energy | Size | |
|---|---|---|---|
| Sum | 26 | 24 | 12 |
| Sum range | 21 to 30 | 15 to 24 | 6 to 12 |
Energy and size land right on the edge, but inside. Brava Spore, which you saved in site 2, is part of the treatment. If you didn’t save it, Fenra Fungor + Glauco Phage + Quara Bacillus (7 · 4 · 3, from round 1) also gives 80%.
With Cetu Spore you can reach 80% too: alongside Brava Spore and Glauco Phage you have the desired trait and only density fails. Either 80% works. What doesn’t pay is to keep searching for a 100% that doesn’t exist.
The result
| Site | Treatment | Score |
|---|---|---|
| 1 | Numa Plankton + Ixa Mycelium + Pelo Plankton | 100% |
| 2 | Delo Mycelium + Coral Agaric + Brava Mycelium | 100% |
| 3 | Brava Spore + Fenra Fungor + Glauco Phage | 80% |
Average: 93%, the highest possible in this game.
What this game teaches
- Work with sums, not averages. Range × 3, and you compare without dividing.
- Build a base of 2 and work out the third microbe’s window. In every round you know what to look for in seconds.
- The microbe that balances beats the perfect one. Pelo Plankton and Coral Agaric don’t fit on their own and they complete 100%.
- Save for the next site. Coral Agaric solved site 2, and Brava Spore was part of the treatment in site 3.
- Watch out for perfect numbers that carry the forbidden trait. Fenra Virus looked ideal in site 1.
- If 100% doesn’t exist, lock in 80% and move on. The clock is the same for all 3 sites.
To practice with new microbes, the Sea Wolf simulator builds a different game every time. And if you want to replay this one, the link at the top always opens the same game.